Skip to main content

AN INTRODUCTION TO HPL

What is hpl

Decorative High Pressure Laminates (HPL), as defined by
the European and international standards for HPL, EN 438
and ISO 4586, are high-density panels (≥1.35g/cm3), finished
and ready for use, which have exceptional mechanical,
physical strength and chemical resistance, are easy to
work and simple to maintain.
Arpa HPL panels are made of several layers of cellulose
fibre material impregnated with thermosetting resins and
then simultaneously subjected to both pressure (>7MPa))
and heat (140 / 150°C) in special presses, for a fixed time,
which varies depending on the type of laminate.
This process creates a stable, inert, homogeneous, nonporous
and high density material, with physical and chemical
properties that are totally different from those of its
original ingredients. In addition, given its very low permeability,
HPL acts as a barrier against the possible emission
of formaldehyde and other volatile substances (VOCs) from
any timber substrates it is applied to.

Composition

HPL panels are made exclusively of cellulose-based materials
(60-70%) and thermosetting resins (30-40%). They can
have decorative finishes on one or both sides.
These are the different layers:
• Overlay
A highly transparent paper, which makes the laminate
surface abrasion and scratch resistant. Used only with
printed patterns.
• Decorative paper
External paper, with no chlorides.
These are coloured or patterned and give the laminate
its aesthetic appearance.
• Kraft paper
“The heart” of HPL. This is the, mostly brown, paper,
which is the core of high-pressure laminate.

The history of hpl

The history of Decorative High Pressure Laminate (HPL)
began back in 1896, when Leo Baekeland, an American
chemist of Belgian origin, combined phenol and formaldehyde
to obtain a resin product that could be converted into
an insoluble polymer.
By adding a fine sawdust filler, he obtained a very dark coloured
plastic material which he patented in 1907 under the
name of Bakelite, from his own surname. The “precursor” of
today’s HPL was born.
This was a material with excellent mechanical and, above
all, electrically non-conductive properties, which immediately
attracted the interest of the electrical industry, replacing
porcelain and mica as the insulating material in electrical
devices.
It was later used in many other areas, from acoustic, electrical
or thermal insulation to agriculture and from textiles to
aviation. However, the poor lightfastness of phenol-formaldehyde
resins did not permit a wide range of colours; these
early laminates could only be in black or brown.
Other discoveries appeared but only on the horizon. As
early as 1906, Leibich was focusing his research on the
reactions of melamine-formaldehyde. It was discovered
that these resins, mixed with cellulose and subjected to a
polymerisation process, produced a solid material with excellent
mechanical properties, stable to light and abrasion
resistant and electrically non-conductive. Then in the ‘40s,
the development of decorative papers that were highly absorbent
of melamine-formaldehyde made it possible to pay
attention to the appearance of the panels by giving them a
more varied and attractive finish.
Modern HPL decorative laminate was born, produced for
the first time in the United States.
In the ‘50s, this new material gained enormous success,
due to both its aesthetic and its functional values. The intrinsic
properties of this revolutionary material and the obvious
advantages it offered as a surface covering, enabled it to
take the place of paints, lacquers, wood veneers, wallpaper
etc.
Initial success was typically seen in kitchen furniture, modular
“American style” kitchens, tables, shelving, restaurant
counters and everywhere that food was handled.
In the decades that followed, research, innovation and development
work for new types of HPL opened the way for
countless potential applications in many different market
sectors and generated a wide range of product types, from
cigarette-proof HPL in the ‘60s to one with self-supporting
properties, from flame spread resistant laminate to the postforming
variety for the furniture industry, from compact to
integral varieties and metals.

เคเคšเคชीเคเคฒ เค•्เคฏा เคนै

เคธเคœाเคตเคŸी เค‰เคš्เคš เคฆเคฌाเคต เคŸुเค•เคก़े เคŸुเค•เคก़े (เคเคšเคชीเคเคฒ), เคฆ्เคตाเคฐा เคชเคฐिเคญाเคทिเคค เค•े เคฐूเคช เคฎें
HPL, EN 438 เค•े เคฒिเค เคฏूเคฐोเคชीเคฏ เค”เคฐ เค…ंเคคเคฐ्เคฐाเคท्เคŸ्เคฐीเคฏ เคฎाเคจเค•
เค”เคฐ เค†เคˆเคเคธเค“ 4586, เค‰เคš्เคš เค˜เคจเคค्เคต เคตाเคฒे เคชैเคจเคฒ (51.35 เคœी / เคธेเคฎी 3) เคนैं, เคธเคฎाเคช्เคค เคนो เค—เค เคนैं
เค”เคฐ เค‰เคชเคฏोเค— เค•े เคฒिเค เคคैเคฏाเคฐ เคนै, เคœो เค…เคธाเคงाเคฐเคฃ เคฏांเคค्เคฐिเค• เคนै,
เคถाเคฐीเคฐिเค• เคถเค•्เคคि เค”เคฐ เคฐाเคธाเคฏเคจिเค• เคช्เคฐเคคिเคฐोเคง, เค•े เคฒिเค เค†เคธाเคจ เคนै
เค•ाเคฎ เค”เคฐ เคธเคฐเคฒ เคฌเคจाเค เคฐเค–เคจे เค•े เคฒिเค।
เค…เคฐเคชा เคเคšเคชीเคเคฒ เคชैเคจเคฒ เคธेเคฒुเคฒोเคœ เค•ी เค•เคˆ เคชเคฐเคคों เคธे เคฌเคจे เคนोเคคे เคนैं
เคซाเค‡เคฌเคฐ เคธाเคฎเค—्เคฐी เคฅเคฐ्เคฎोเคธेเคŸिंเค— เคฐेเคœिเคจ เค•े เคธाเคฅ เค—เคฐ्เคญเคตเคคी เคนुเคˆ เค”เคฐ
เคซिเคฐ เคเค• เคธाเคฅ เคฆोเคจों เคฆเคฌाเคต (> 7MPa) เค•े เค…เคงीเคจ
เค”เคฐ เค—เคฐ्เคฎी (140/150 ° C) เคตिเคถेเคท เคช्เคฐेเคธ เคฎें, เคเค• เคจिเคถ्เคšिเคค เคธเคฎเคฏ เค•े เคฒिเค,
เคœो เคŸुเค•เคก़े เคŸुเค•เคก़े เค•े เคช्เคฐเค•ाเคฐ เค•े เค†เคงाเคฐ เคชเคฐ เคญिเคจ्เคจ เคนोเคคा เคนै।
เคฏเคน เคช्เคฐเค•्เคฐिเคฏा เคเค• เคธ्เคฅिเคฐ, เคจिเคท्เค•्เคฐिเคฏ, เคธเคœाเคคीเคฏ, เค—ैเคฐ-เคธเคฎเคฐूเคช เคฌเคจाเคคी เคนै
เค”เคฐ เค‰เคš्เคš เค˜เคจเคค्เคต เคธाเคฎเค—्เคฐी, เคญौเคคिเค• เค”เคฐ เคฐाเคธाเคฏเคจिเค• เค•े เคธाเคฅ
เค—ुเคฃ เคœो เค‡เคธเค•े เคธे เคฌिเคฒ्เค•ुเคฒ เค…เคฒเค— เคนैं
เคฎूเคฒ เคธाเคฎเค—्เคฐी। เค‡เคธเค•े เค…เคฒाเคตा, เค‡เคธเค•ी เคฌเคนुเคค เค•เคฎ เคชाเคฐเค—เคฎ्เคฏเคคा เค•ो เคฆेเค–เคคे เคนुเค,
เคเคšเคชीเคเคฒ เคธंเคญाเคตिเคค เค‰เคค्เคธเคฐ्เคœเคจ เค•े เค–िเคฒाเคซ เคเค• เคฌाเคงा เค•े เคฐूเคช เคฎें เค•ाเคฐ्เคฏ เค•เคฐเคคा เคนै
เคซाเคฐ्เคฎเคฒाเคกेเคนाเค‡เคก เค”เคฐ เค…เคจ्เคฏ เคตाเคท्เคชเคถीเคฒ เคชเคฆाเคฐ्เคฅों (เคตीเค“เคธी) เคธे
เค•िเคธी เคญी เคฒเค•เคก़ी เคธเคฌ्เคธเคŸ्เคฐेเคŸ เคฏเคน เค•เคฐเคจे เค•े เคฒिเค เคฒाเค—ू เค•िเคฏा เคœाเคคा เคนै।

เคฐเคšเคจा

เคเคšเคชीเคเคฒ เคชैเคจเคฒ เคตिเคถेเคท เคฐूเคช เคธे เคธेเคฒूเคฒोเคœ़-เค†เคงाเคฐिเคค เคธाเคฎเค—्เคฐी เคธे เคฌเคจे เคนोเคคे เคนैं
(60-70%) เค”เคฐ เคฅเคฐ्เคฎोเคธेเคŸिंเค— เคฐेเคœिเคจ (30-40%)। เคตे เค•เคฐ เคธเค•เคคे เคนैं
เคเค• เคฏा เคฆोเคจों เคคเคฐเคซ เคธเคœाเคตเคŸी เค–เคค्เคฎ เคนैं।
เคฏे เคตिเคญिเคจ्เคจ เคชเคฐเคคें เคนैं:
• เค“เคตเคฐเคฒे
เคเค• เค…เคค्เคฏเคงिเค• เคชाเคฐเคฆเคฐ्เคถी เค•ाเค—เคœ, เคœो เคŸुเค•เคก़े เคŸुเค•เคก़े เค•เคฐเคคा เคนै
เคธเคคเคน เค˜เคฐ्เคทเคฃ เค”เคฐ เค–เคฐोंเคš เคช्เคฐเคคिเคฐोเคงी। เค•े เคธाเคฅ เคนी เคช्เคฐเคฏोเค— เค•िเคฏा เคœाเคคा เคนै
เคฎुเคฆ्เคฐिเคค เคชैเคŸเคฐ्เคจ।
• เคธเคœाเคตเคŸी เค•ाเค—เคœ
เคฌाเคนเคฐी เค•ाเค—เคœ, เคœिเคธเคฎें เค•ोเคˆ เค•्เคฒोเคฐाเค‡เคก เคจเคนीं เคนै।
เคฏे เคฐंเค—ीเคจ เคฏा เคชैเคŸเคฐ्เคจ เคตाเคฒे เคนोเคคे เคนैं เค”เคฐ เคŸुเค•เคก़े เคŸुเค•เคก़े เคฆेเคคे เคนैं
เค‡เคธเค•ी เคธौंเคฆเคฐ्เคฏ เค‰เคชเคธ्เคฅिเคคि।
• เค•्เคฐाเคซ़्เคŸ เคชेเคชเคฐ
เคเคšเคชीเคเคฒ เค•ा "เคฆिเคฒ"। เคฏเคน เคนै, เคœ्เคฏाเคฆाเคคเคฐ เคญूเคฐे, เค•ाเค—เคœ,
เคœो เค‰เคš्เคš เคฆเคฌाเคต เค•े เคŸुเค•เคก़े เคŸुเค•เคก़े เค•ा เคฎूเคฒ เคนै।

เคเคšเคชीเคเคฒ เค•ा เค‡เคคिเคนाเคธ

เคธเคœाเคตเคŸी เค‰เคš्เคš เคฆเคฌाเคต เคŸुเค•เคก़े เคŸुเค•เคก़े (เคเคšเคชीเคเคฒ) เค•ा เค‡เคคिเคนाเคธ
1896 เคฎें เคตाเคชเคธ เคถुเคฐू เคนुเค†, เคœเคฌ เคฒिเคฏो เคฌेเค•เคฒैंเคก, เคเค• เค…เคฎेเคฐिเค•ी
เคฌेเคฒ्เคœिเคฏเคฎ เคฎूเคฒ เค•े เคฐเคธाเคฏเคจเคœ्เคž, เคธंเคฏुเค•्เคค เคซिเคจोเคฒ เค”เคฐ เคซॉเคฐ्เคฎเคฒाเคกेเคนाเค‡เคก
เคเค• เคฐाเคฒ เค‰เคค्เคชाเคฆ เคช्เคฐाเคช्เคค เค•เคฐเคจे เค•े เคฒिเค เคœिเคธे เคฎें เคชเคฐिเคตเคฐ्เคคिเคค เค•िเคฏा เคœा เคธเค•เคคा เคนै
เคเค• เค…เค˜ुเคฒเคจเคถीเคฒ เคฌเคนुเคฒเค•।
เคเค• เคฌเคข़िเคฏा เคšूเคฐा เคญเคฐाเคต เคœोเคก़เค•เคฐ, เค‰เคจ्เคนोंเคจे เคฌเคนुเคค เค—เคนเคฐे เคฐंเค— เค•ा เคฐंเค— เคช्เคฐाเคช्เคค เค•िเคฏा
เคช्เคฒाเคธ्เคŸिเค• เคธाเคฎเค—्เคฐी เคœिเคธे เค‰เคจ्เคนोंเคจे 1907 เคฎें เคชेเคŸेंเคŸ เค•เคฐाเคฏा เคฅा
เค…เคชเคจे เค–ुเคฆ เค•े เค‰เคชเคจाเคฎ เคธे เคฌेเค•ेเคฒाเค‡เคŸ เค•ा เคจाเคฎ। เค•े "เค…เค—्เคฐเคฆूเคค"
เค†เคœ เค•ा เคเคšเคชीเคเคฒ เคชैเคฆा เคนुเค† เคฅा।
เคฏเคน เค‰เคค्เค•ृเคท्เคŸ เคฏांเคค्เคฐिเค• เค”เคฐ, เคŠเคชเคฐ เค•ी เคธाเคฎเค—्เคฐी เคฅी
เคธเคญी, เคตिเคฆ्เคฏुเคค เค—ैเคฐ-เคช्เคฐเคตाเคนเค•ीเคฏ เค—ुเคฃ, เคœो เคคुเคฐंเคค
เคตिเคฆ्เคฏुเคค เค‰เคฆ्เคฏोเค— เค•ी เคฐुเคšि เค•ो เคช्เคฐเคคिเคธ्เคฅाเคชिเคค เค•िเคฏा
เคตिเคฆ्เคฏुเคค เคฎें เค‡เคจ्เคธुเคฒेเคŸ เคธाเคฎเค—्เคฐी เค•े เคฐूเคช เคฎें เคšीเคจी เคฎिเคŸ्เคŸी เค•े เคฌเคฐเคคเคจ เค”เคฐ เค…เคญ्เคฐเค•
เค‰เคชเค•เคฐเคฃ।
เคฏเคน เคฌाเคฆ เคฎें เคง्เคตเคจिเค•, เคตिเคฆ्เคฏुเคค เคธे เค•เคˆ เค…เคจ्เคฏ เค•्เคทेเคค्เคฐों เคฎें เค‰เคชเคฏोเค— เค•िเคฏा เค—เคฏा เคฅा
เคฏा เค•ृเคทि เค•े เคฒिเค เค”เคฐ เคตเคธ्เคค्เคฐों เคธे เคฅเคฐ्เคฎเคฒ เค‡เคจ्เคธुเคฒेเคถเคจ
เคตिเคฎाเคจเคจ। เคนाเคฒांเค•ि, เคซिเคจोเคฒ-เคซॉเคฐ्เคฎेเคฒ्เคกिเคนाเค‡เคก เค•ी เค–เคฐाเคฌ เคฐोเคถเคจी
เคฐेเคœिเคจ เคจे เคฐंเค—ों เค•ी เคเค• เคตिเคธ्เคคृเคค เคถ्เคฐृंเค–เคฒा เค•ी เค…เคจुเคฎเคคि เคจเคนीं เคฆी; เค‡เคจ
เคถुเคฐुเค†เคคी เคŸुเค•เคก़े เคŸुเค•เคก़े เค•ेเคตเคฒ เค•ाเคฒे เคฏा เคญूเคฐे เคฐंเค— เคฎें เคนो เคธเค•เคคे เคนैं।
เค…เคจ्เคฏ เค–ोเคœें เคธाเคฎเคจे เค†เคˆं เคฒेเค•िเคจ เค•ेเคตเคฒ เค•्เคทिเคคिเคœ เคชเคฐ। เคœैเคธा
1906 เค•ी เคถुเคฐुเค†เคค เคฎें, เคฒीเคฌिเคš เค…เคชเคจे เคถोเคง เคชเคฐ เคง्เคฏाเคจ เค•ेंเคฆ्เคฐिเคค เค•เคฐ เคฐเคนा เคฅा
เคฎेเคฒाเคฎाเค‡เคจ-เคซॉเคฐ्เคฎेเคฒ्เคกिเคนाเค‡เคก เค•ी เคช्เคฐเคคिเค•्เคฐिเคฏाเคं। เคฏเคน เค–ोเคœा เค—เคฏा
เค•ि เค‡เคจ เคฐेเคœिเคจ, เคธेเคฒूเคฒोเคœ़ เค•े เคธाเคฅ เคฎिเคถ्เคฐिเคค เค”เคฐ เคเค• เค•े เค…เคงीเคจ
เคชोเคฒीเคฎเคฐाเค‡เคœेเคถเคจ เคช्เคฐเค•्เคฐिเคฏा, เค‰เคค्เค•ृเคท्เคŸ เค•े เคธाเคฅ เคเค• เค ोเคธ เคธाเคฎเค—्เคฐी เค•ा เค‰เคค्เคชाเคฆเคจ เค•िเคฏा
เคฏांเคค्เคฐिเค• เค—ुเคฃों, เคช्เคฐเค•ाเคถ เค”เคฐ เค˜เคฐ्เคทเคฃ เค•े เคฒिเค เคธ्เคฅिเคฐ
เคช्เคฐเคคिเคฐोเคงी เค”เคฐ เคตिเคฆ्เคฏुเคค เค—ैเคฐ-เคช्เคฐเคตाเคนเค•ीเคฏ। เคซिเคฐ ‘40 เค•े เคฆเคถเค• เคฎें,
เคธเคœाเคตเคŸी เคชเคค्เคฐों เค•ा เคตिเค•ाเคธ เคœो เค…เคค्เคฏเคงिเค• เคถोเคทเค• เคฅे
เคฎेเคฒाเคฎाเค‡เคจ-เคซॉเคฐ्เคฎेเคฒ्เคกिเคนाเค‡เคก เค•ा เคญुเค—เคคाเคจ เค•เคฐเคจा เคธंเคญเคต เคฌเคจा เคฆिเคฏा
เคชैเคจเคฒों เค•ी เค‰เคชเคธ्เคฅिเคคि เคชเคฐ เคง्เคฏाเคจ เคฆेเค•เคฐ เค‰เคจ्เคนें เค
เค…เคงिเค• เคตिเคตिเคง เค”เคฐ เค†เค•เคฐ्เคทเค• เค–เคค्เคฎ।
เค†เคงुเคจिเค• เคเคšเคชीเคเคฒ เคธเคœाเคตเคŸी เคŸुเค•เคก़े เคŸुเค•เคก़े เค•ा เคœเคจ्เคฎ เคนुเค†, เคœिเคธเค•े เคฒिเค เค‰เคค्เคชाเคฆเคจ เค•िเคฏा เค—เคฏा
เคธंเคฏुเค•्เคค เคฐाเคœ्เคฏ เค…เคฎेเคฐिเค•ा เคฎें เคชเคนเคฒी เคฌाเคฐ।
S 50 เค•े เคฆเคถเค• เคฎें, เค‡เคธ เคจเคˆ เคธाเคฎเค—्เคฐी เคจे เคญाเคฐी เคธเคซเคฒเคคा เคช्เคฐाเคช्เคค เค•ी,
เค‡เคธเค•े เคธौंเคฆเคฐ्เคฏ เค”เคฐ เค‡เคธเค•े เค•ाเคฐ्เคฏाเคค्เคฎเค• เคฎूเคฒ्เคฏों เคฆोเคจों เค•े เค•ाเคฐเคฃ। เค†ंเคคเคฐिเค•
เค‡เคธ เค•्เคฐांเคคिเค•ाเคฐी เคธाเคฎเค—्เคฐी เค”เคฐ เคธ्เคชเคท्เคŸ เค•े เค—ुเคฃ
เคธเคคเคน เค•े เค†เคตเคฐเคฃ เค•े เคฐूเคช เคฎें เคชेเคถ เค•िเค เค—เค เคซाเคฏเคฆे, เค‡เคธे เคธเค•्เคทเคฎ เค•เคฐเคคे เคนैं
เคชेंเคŸ, เคฒाเคน, เคฒเค•เคก़ी เค•े เคฒिเคฌाเคธ, เคตॉเคฒเคชेเคชเคฐ เค•ी เคœเค—เคน เคฒे เคฒो
เค†เคฆि।
เคช्เคฐाเคฐंเคญिเค• เคธเคซเคฒเคคा เค†เคฎ เคคौเคฐ เคชเคฐ เคฐเคธोเคˆ เค•े เคซเคฐ्เคจीเคšเคฐ, เคฎॉเคก्เคฏूเคฒเคฐ เคฎें เคฆेเค–ी เค—เคˆ เคฅी
"เค…เคฎेเคฐिเค•ी เคถैเคฒी" เคฐเคธोเคˆ, เคŸेเคฌเคฒ, เค ंเคกे เคฌเคธ्เคคे, เคฐेเคธ्เคคเคฐां
เค•ाเค‰ंเคŸเคฐ เค”เคฐ เคนเคฐ เคœเค—เคน เค‰เคธ เคญोเคœเคจ เค•ो เคธंเคญाเคฒा เค—เคฏा เคฅा।
เคฆเคถเค•ों เค•े เคฌाเคฆ, เค…เคจुเคธंเคงाเคจ, เคจเคตाเคšाเคฐ เค”เคฐ เคตिเค•ाเคธ
เคจเค เคช्เคฐเค•ाเคฐ เค•े เคเคšเคชीเคเคฒ เค•े เคฒिเค เค•ाเคฎ เค•เคฐเคจे เค•ा เคฐाเคธ्เคคा เค–ुเคฒा
เค•เคˆ เค…เคฒเค—-เค…เคฒเค— เคฌाเคœाเคฐ เคฎें เค…เคจเค—िเคจเคค เคธंเคญाเคตिเคค เค…เคจुเคช्เคฐเคฏोเค—
เค•्เคทेเคค्เคฐों เค”เคฐ เคธे เค‰เคค्เคชाเคฆ เคช्เคฐเค•ाเคฐ เค•ी เคเค• เคตिเคธ्เคคृเคค เคถ्เคฐृंเค–เคฒा เค‰เคค्เคชเคจ्เคจ เค•ी
เคธिเค—เคฐेเคŸ-เคช्เคฐूเคซ เคเคšเคชीเคเคฒ s 60 เค•े เคฆเคถเค• เคฎें เคธेเคฒ्เคซ-เคธเคชोเคฐ्เคŸिंเค— เค•े เคธाเคฅ
เค—ुเคฃ, เคฒौ เคธे เคช्เคฐเคคिเคฐोเคงी เคŸुเค•เคก़े เคŸुเค•เคก़े เคฎें เคซैเคฒเคคे เคนैं
เคซเคฐ्เคจीเคšเคฐ เค‰เคฆ्เคฏोเค— เค•े เคฒिเค เคตिเคญिเคจ्เคจ เคช्เคฐเค•ाเคฐ, เค•ॉเคฎ्เคชैเค•्เคŸ เคธे
เค…เคญिเคจ्เคจ เค•िเคธ्เคฎें เค”เคฐ เคงाเคคु।



Comments

Popular posts from this blog

Medlum Density Fibre Board (MDF)

Medium Density Fibre Board (MDF)  MDF IS made from wood and other lignocellulose material refined into fibres and reconstituted with a resin binder. Row wood material is normally a single species wood. MDF has homogeneous structure with uniform density, texture and properties throughout, no identifiable grain can be seen at edge, end or face. There are no internal voids or pits and there is no variation in the surface hardness. Unlike plywood MDF doesn't delaminate. It has much higher strength than particle board. Since edges are totally smooth and uniform, costly tipping or beading with strips of wood required for plywood and particle board is not essential. It can be carved, grooved or embossed just like any timber. The surface of MDF is totally smooth and accepts all kinds of finishes - paints, varnishes and laminates. One such type of famous board in the market is 'Duratuff" . It comes in both interior and exterior grade. Duratuff prelaminated boards are also avail...

The loads Acting on staircase.

Distribution of  Loads  and its Effect on  Staircase Stair  slabs are usually designed to resist gravity  loads , comprising of dead  loads  and live  loads  as described below:  1) Dead  Load : The components of the dead  load  to be considered are: a) Self-weight of  stair  slab (tread/tread-riser slab/waist slab) b) Self-weight of ... LIVE LOADS:- IS 875 parts II specifies the load to be considered as UDL of intensity 5KN/m2 for public  buildings and 3kN/m2 for residential building where the specified floor do not exceed 2kN/m2 and the staircases are should not liable for overcrowding. DEAD LOADS:- Self-weight of stair slab which includes the waist slab, tread-rise,etc. Self-weight of finishes (0.5 to 1 kN/m?) Types of stairs                                                ...

MACHINE FOUNDATION.

MACHINE FOUNDATION. The design of machine foundation involves careful study of the vibration characteristics of the foundation system. Relevant data for the design and construction of the foundation of machine should be obtained from the manufacturer of the machine , prior to the start design.  All parts of machine foundation should be designed for maxim stresses due to the worst combination of vertical loads, torque, longitudinal and transverse forces, stresses due to temperature variation and the foundation dead load. In case, the foundation layout is partly built up of beam and column construction , straight bars should be provided both at top and bottom of the beams and the spacing of the stirrups should be close. The main foundation block should have the designed thickness and should be reinforced both at top and bottom even if the reinforcements are not required from design considerations. Machine foundations  are special types of  foundations  required fo...